Communications
1) Start Commander and click START COMMS to navigate to Commander's main screen.
2) Navigate to the following menu at the top of the Commander Main screen HELP/SYSTEM INFO.
3) Under SYSTEM SUMMARY find the listing for processor and make a note of the processor speed in MHZ (Example 2394 Mhz).
4) Close the SYSTEM INFO screen.
5) Go to menu SETUP/COMMUNICATIONS
6) Enter the processor speed (from step 3) in the speed code box (Example 2394).
7) Use the up/down arrows next to MAX LOOPS FOR COMMS A so that it displays the required value. (Normally should be set to 32 or the maximum number of controls that are allowed to be connected on one communication port. 1 is reserved for a special use and normally should not be used.
8) Click SAVE COMM GROUP.
9) Close the Communication Setup screen.