Sensor types and connections
Each of the 8 input channels of DaqPRO is multipurpose and can be individually configured to any of the following types and ranges:
Current: 0 - 20mA
Pulse counter (input 1 only) 0 to 65,000 pulses
Temperature Internal -25 to 70C (-13 to 158F)
Temperature NTC 10K -25 to 150C (-13 to 302F)
Temperature NTC 100K -25 to 150C (-13 to 302F)
Temperature PT-100 2 wire -200 to 400C (-328 to 752F)
Temperature PT-100 3 wire -200 to 400C (-328 to 752F)
Temperature Thermocouple J -200 to 1200C (-328 to 2192F)
Temperature Thermocouple K -250 to 1200C (-328 to 2192F)
Temperature Thermocouple T -200 to 400C (-328 to 752F)
Voltage 0 - 10VDC
Voltage 0 - 50mVDC
User defined Up to 20 types 0 - 10V or 0 - 20mA
Degrees F or C can be selected in the System Configuration menu on the DaqPRO. All temperature inputs will be the same units.
Connect the sensor to the terminal block at the top of DaqPRO:
Sensors must be added successively, starting with input-1. If a single sensor is used it must be connected to Input-1. If two sensors are used, they must be connected to Input-1 and Input-2 and so on