ISE Frequently Asked Questions - Controllers:West EC-44 Control
|   ISE Home   |    Product List    |   Literature & Manuals   |   Frequently Asked Questions   |   Contact ISE   |    VARIAC   |    Store & Pricing   |
Quick Jump Menu
Categories
There are no subcategories in this category.
1 How to add custom Buttons to Commander for West EC-44

Setting up Custom Buttons in Commander for use with West EC-44 controls. Commander software includes an option that allows the user to design a set of custom buttons that will be available on the single loop display. All controls that utilize these buttons…

2 How to use West EC-44 with Commander Software

EC-44 RS485 Communication Notes Relating to Commander Default Communication settings for EC-44: Protocol: Modbus RTU Baud: 19.2K Parity: None Data Bits: 8 Stop Bits: 1 Slave ID: None We have developed three tables of parameters that can be used for the EC-44…

3 Modbus Table Update For Commander (Added EC-44)

Modbus Table File Update for Commander Software: Includes Tables for West EC-44 Control. Instructions: Download by clicking on the link below. Unzip the file and replace your ModbusTables file. The file is located in Modbus subfolder in the location that…

4 What are the default serial communication settings for the West EC-44

Default Communication settings for EC-44: Protocol: Modbus RTU Baud: 19.2K Parity: None Data Bits: 8 Stop Bits: 1 These default parameters also include the configuration port on the bottom of the control and controls that include the RS485 option. These parameters…

Info Ask a Question